Enermax EG475P-SFMA24P Power Supply

Features:

ATX 12V V 2.0 :Support latest P4 Prescott and Athlon 64/64 FX processors based systems: P4 main boards that use 875 (Canterwood) and 865 (Springdale) chipsets, and also fully support power requirements for platforms using chipsets like Intel 925 (Alderwood) or 915 (Grantsdale) and next generation CPU.

Smart fan:After PC shuts down, cooling fans keep running for at least 2 minutes to effectively cool down parts and hardwares inside PSU and PC cases. Thus, ensure longer product life time of power supply and hardwares inside PC case.

Separate 12V rails:Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety requirements

S-ATA connectors:Connect your system to the faster S-ATA interface for better performance.

Manual and automatic fan speed control : 8cm & 9cm fans automatically controlled by thermostat plus rheostat control over 8cm fan. Enable users to keep the balance between cooling effect and acoustic noise.

Extra Power connector:Extra 4-pin power connector provides high-end graphic card with stable current.

Reliability:OCP, UVP, OVP, OLP, OTP, and SCP circuits ensure system well-guarded from any dangers. Maximize safety for your hardware and valuable data.

Ring Core:Effectively prevents electro-magnetic pulse leaking from switching power supply to appliances that are being attached to the same power source,i.e.AC wall plug.

Dual Fan:The best cooling method for PC system, and is strongly suggested by AMD.

Silence:Acoustic noise is successfully reduced with two fans giving more airflow in less rpm and smooth mechanical design of fan guards.

FM & FC functions: RPM signal of 8cm exhaust fan is provided; EG xxx AX-VE SFCA/FCA models allow MB to on/off control 8cm exhaust fan.

Specifications:
EG475P-SFMA24P
AC Input 95V~135V or 180V~265V (selected by slide switch)
Lin(AC)=115V/230V 10A / 5A
Frequency 47Hz~63Hz
Inrush Current Limiting 60A 115V/230V max. during cold start
Hold up time 17ms at 115VAC or 230VAC, full load
DC output rating
DC Output Rippe & Noise Tolerance Current Min / Max
+3.3V 50mV ±5% 0.5A/34A
+5V 50mV ±5% 0.3A/40A
+12V 1 120mV ±5% 0.5A/16A
+12V 2 120mV ±5% 0.5A/15A
-12V 120mV ±10% 0A/0.8A
+5Vsb 50mV ±5% 0A/2.5A
+3.3V & +5V 280W
Total power 470W
Over Voltage Protection +5V: 5.5V~7.0V +3.3V: 3.76V~4.3V +12V1 & +12V2: 13.4V~15.6V
Over Load Protection 110~160% of max load
Over Current. Protection +3.3V: 55A (max) +5V: 48A (max) +12V1 & +12V2: 20A (max)
Over Temp. Protection 85 for heat sink
Under Temp. Protection 0 for heat sink (±2)
Operating Temp. 0 ~ 40
Storage Temp. -40 ~ 70
Humidity Operation¡Gto 85% relative humidity, non condensing at 25
Storage to 95% relative humidity, non condensing at 50
M.T.B.F. Greater than 100k hours at 70% of full rated load; 230VAC / 50Hz input; 25, ambient
EMC EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety Approval UL (Level 3), cUL (Level 3), TÜV, CB
Cooling 8cm Fan * 1; 9cm Fan *1
Dimensions W150*H86*D140(mm)

Details


SKU	EG475P-SFMA24P
Weight	5.00 lbs
Price:	$73.95

Options


Quantity	Out of stock