Enermax Noisetaker 495P (485W) PSU - EG495P-VE SFMA

Enermax Noisetaker 495P (485W) PSU - EG495P-VE SFMA

Features:

Smart fan function
- The Smart Fan technology was developed by the folks at Enermax to protect your investment. After your system shutdown, the two ball earing fans continue to run for another 2 mins to cool off your power supply and components . It also has a heat sensor that will allow the fans to run for more then 2 mins if the temp is greater then 40c after the 2 min. This will greatly increase the life your power supply and components.
Dual +12V Rails
- Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety requirements. It also separate the motherboard rails and video card rails to ensure maximum power to your PCI Express video card.
High efficiency
- High efficiency is achieve by using using high quality components and the skills of our designer to maximizes your power supply output and minimize wasted power. Efficiency is the measure of how much of the 100% power going in to the PSU is being used up and the unused power dissipate into heat through the heatsink. Lower efficiency means that more power is being wasted and also the PSU will generate more heat. .
Ring core technology
- Effectively prevents electro-magnetic pulse leaking from switching power supply to appliances that are being attached to the same power source, i.e. AC wall plug.

Protection

Enermax has one of the highest protection standard on the market today, due to our advance design we offer the following type of protections:

OCP -Over Current Protection, UCP -Under Current Protection, OVP - Over Voltage Protection, OLP -Over Load Protection, OTP - Over Temperature Protection, SCP - Short Circuits Protection.

20+4 Main power

EPS 12V

PCI E Ready

Serial ATA

HDD Power

FDD Power

Fan RPM Monitor

20+4 Pins Main Power: 1 (support 24P and 20P MB)
P4 +12V (8pins)CPU : 1
6 Pins PCI Express : 1
Serial ATA : 4
HDD Power :7
FDD Power : 2
Fan Monitor: 1

Specifications:

Maximum Power: 485W
Input Voltage: 95~135V or 180V~265V (selected by slide switch)
Input Frequency Range: 47Hz~63Hz
Input Current: 40A/115V and 80A/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A (max)
Over Temperature Protection: Operating Ambient 10ºC~40ºC, Storage Ambient -40ºC~70ºC
Humidity:
Operating : to 85% relative humidity, non condensing at 25ºC
Storage: to 95% relative humidity, non condensing at 50ºC
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25ºC ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TÜV, CB
Dimensions: W150 x H86 x D140 (mm)

Rails	EG495P-VE SFMA 2.0
+12v1	18A	32A combine pw
+12v2	18A	32A combine pw
-12v	0.8A
+5v	32A
+5v sb	2.5A
+3.3v	32A

Details


SKU	EG495P-VE
Weight	6.25 lbs
Price:	$75.95

Options


Quantity	Out of stock