Whisper II 2.0 PFC (535W)
[EG565AX-VE FMA]

Features:

• ATX +12V Ver 2.01
  • The latest power supply design guide recommended by Intel to meet the latest specifications. Support all of the latest Intel (915/925 chipset) and AMD 64 processors.
    One of the changes from ATX12V Ver 1.3 is the Dual +12V Rails, this allows processors to operate on a separate +12V rails in order to minimize any unwanted noise from peripherals that might cause system to lock up.
• Dual +12V Rails
  • Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety requirements. It also separate the motherboard rails and video card rails to ensure maximum power to your PCI Express video card.
• High efficiency
  • High efficiency is achieve by using using high quality components and the skills of our designer to maximizes your power supply output and minimize wasted power. Efficiency is the measure of how much of the 100% power going in to the PSU is being used up and the unused power dissipate into heat through the heatsink. Lower efficiency means that more power is being wasted and also the PSU will generate more heat.
• Ring core technology
  • Effectively prevents electro-magnetic pulse leaking from switching power supply to appliances that are being attached to the same power source, i.e. AC wall plug.
• Protection
  • Enermax has one of the highest protection standard on the market today, due to our advance design we offer the following type of protections:
  • OCP -Over Current Protection, UCP -Under Current Protection, OVP - Over Voltage Protection, OLP -Over Load Protection, OTP - Over Temperature Protection, SCP - Short Circuits Protection.

Specifications :
Model: EG565AX-VE FMA 2.0
Active PFC: Yes
Maximum Power: 535W (support both 24pins and 20pins motherboards)
Input Voltage: 90V~135V or 90V~265V (auto switch)
Input Frequency Range: 47Hz~63Hz
Input Current: 40A/115V and 80A/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A (max)
Over Temperature Protection: Operating Ambient 10ºC~40ºC, Storage Ambient -40ºC~70ºC
Humidity:
Operating : to 85% relative humidity, non condensing at 25ºC
Storage: to 95% relative humidity, non condensing at 50ºC
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25ºC ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TÜV, CB
Dimensions: W150 x H86 x D140 (mm)