ThermalTake ToughPower 1200W Power Supply
Features:
- Stable 1200W continuous output (at 50℃ operating environment)
- Four independent & dedicated +12V rails(12V1,12V2,12V3,12V4) provides superior performance for PC system.
- NEW! Three 8pin and three 6pin PCI-E connectors design supports Multi-GPU Graphic cards.
- Supports Dual Core CPU / Quad Core CPU / Nvidia SLI & Quad SLI and all Multi-Core GPU technologies.
- Modularized Cable Management to eliminate clutter and improve airflow inside the case.
- Independent Voltage Circuit: offers unflappable current delivery under heavy load.
- Strict voltage regulation (±3%): provides steady voltage for system.
- Active Power Factor Correction (PF>0.99) and high efficiency (up to 87%).
- Industrial grade components (capacitor, transformer, etc)
- High reliability: MTBF>120,000 hours.
- Quiet and reliable 14cm ball-bearing fan.
- Protectected against Over Current, Over Voltage, Under Voltage, Over Temperature, Over Power, and Short-Circuit protection.
- Safety / EMI Approvals: CE, CB, TUV, FCC, UL, CUL, and BSMI certified.
Output Connectors:
20+4-pin Main
Connector X 1
4+4 pin power
connector X 1
8-pin power
connector X 1
|
4-pin Peripheral
Connector X 8
Floppy
Connector X 2
|
5-pin S-ATA
Connector X 8
|
8-pin PCI-E
Connector X 3
|
6-pin PCI-E
Connector X 3
|
|
Technological Features:
Quad +12V Rails and EPS Structure
|
Hi-Tech Black Coating
|
8 S-ATA Connectors
|
Silent 140mm Fan
|
Noise Preventive Silicon Pad - Effectively reduces vibration noise by as much as 80%
|
|
|
| Intelligent Cable Management (W0132/W0133 only) : |
Specifications:
|
Model |
W0133RU |
|
Power |
1200W |
|
Dimension |
200mm(L)x160mm(W)x86mm(H) |
|
Switches |
ATX Logic on-off additional power rocker switch |
|
PFC |
Active PFC (PF > 0.9) |
|
Cooling System |
140mm Fan, 2300RPM ± 10% |
|
Noise |
16 dBA at 1300 RPM |
|
P. G. Signal |
100-500 ms |
|
Efficiency |
up to 87% |
|
Hold-up Time |
16ms |
|
INPUT |
|
Input Voltage |
115 VAC ~ 230 VAC |
|
Input Frequency Range |
47 ~ 63 Hz |
|
MTBF |
120,000 hrs minimum (at 25 ℃) |
|
Input Current |
15A |
|
OUTPUT |
|
Voltage |
+12V1 |
+12V4 |
+3.3V |
+12V2 |
+12V3 |
+5V |
-12V |
+5Vsb |
|
Max/Min |
20A/1A |
36A/1A |
30A/0.5A |
20A/1A |
36A/1A |
30A/0.5A |
0.8A/0A |
3.5A/0A |
|
Regulation *1 |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+10,-10% |
+3,-5% |
|
Ripple & Noise
*2 |
120mV |
120mV |
50mV |
120mV |
120mV |
50mV |
120mV |
50mV |
|
Max Output |
600W
|
600W
|
9.6W |
17.5W |
|
Total Power |
1200W |
|
*1. +5Vsb operate at 3.5A max load base on PS-ON mode. If
PS-OFF +5Vsb only operate
at 3A max load.
*2. Add 0.1uF and 47uF capacitors across output terminal during ripple &
noise test.
|
|
ENVIRONMENT |
|
Operating Temp. |
10 ℃ to 50 ℃ |
|
Storage Temp. |
-20 ℃ to 70℃ |
|
Operating Humidity |
20% to 90%, non-condensing |
|
Storage Humidity |
5% to 95%, non-condensing |
|
PROTECTION |
|
DC rail |
Trigger Point/Range |
|
Over Voltage Protection |
+3.3V trip point |
4.5 Vmax |
|
+5.0V trip point |
7.0 Vmax |
|
+12.0V trip point |
15.6 Vmax |
|
Over Current Protection |
+3.3V |
33A ~ 50A |
|
+5.0V |
33A ~ 50A |
|
+12V1 & +12V2 |
22A ~ 35A |
|
+12V3 & +12V4 |
39A ~ 55A |
|
Under Voltage Protection |
+3.3V trip point |
2.0 Vmin |
|
+5.0V trip point |
3.3 Vmin |
|
+12.0V trip point |
8.5 Vmin |
|
Short Protection |
All output to GND |
|
|
Cart is empty
